BNF Models
Bolt-On Neck Fretless Series

The BNF Series produces more of a traditional fretless tone as opposed to the AC line. The combination of body woods used provides a very solid low end with plenty of midrange for that characteristic punch and growl. The two separate volumes allow you to blend the two pickups in any amount of each, not limiting you to the fixed levels of a blend control. The passive tone control functions whether in passive or active mode enabling it to modify a different set of frequencies than the ones affected by the active tone controls.

 

 

STANDARD OPTIONS:      
 
4 string
5 string
6 string
 
Nut Width
42mm (1 5/8")
45mm (1 3/4")
54mm (2 1/8")
Width at Last Fret
66mm (2 5/8")
 80mm (3 1/8") 96mm (3 25/32”)
Fingerboard Radius
10" - 16"
10" - 16"
10" - 16"
Scale Length
34"
34.5"
34.5"
Number of Frets
28

String Spacing at Bridge

19mm (3/4")
Neck Wood
3 piece quarter-sawn maple
Fingerboard Wood
Gabon Ebony (Black)
Body Wood
Maple Centreblock with Ash Wings
Tuners
Black Gotoh tuners with 20:1 ratio
Bridge
Black Hipshot A Style, strings through body
Knobs
Handmade African Blackwood

Pickups

Two F Bass stacked, single coil/hum-cancelling, magnetic pickups
Finish
NATURAL with natural grain
 
NATURAL with black grain (Black Hardware Standard)
 
 TRANSPARENT BLUE with black grain (Also available as a Burst)
 
TRANSPARENT GREEN with black grain (Also available as a Burst)
 
TRANSPARENT RED with black grain (Also available as a Burst)
 
BROWN BURST, Natural to Brown, with mahogany grain
 
 
OPTIONS (Additional Charges Apply):
 
 
 
 
 
 
 
Hardware Colour
Chrome (No Additional Charge)
 
Gold
Finishes
Tops

 



 




 

 
  all content and images © copyright 2007 F-Bass